.280 Ackley Improved 162 Grain Hornady ELD-X~100% HAND-LOADED!!

.280 Ackley Improved 162 Grain Hornady ELD-X– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

The Bullet-

The Heat Shield tip of the Hornady ELD-X bullet defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.

• Velocity 2,945 fps
• 100% Hand Loaded

Additional Information